LG DL X670 Series Owner'S Manual Download Page 44

Page: 44 / 64

OPERATION

Turn the knob to select or change the setting

and press the

(

) button to save the

setting.

To return to the previous screen, press the

Options

button again or press the

(

Previous

) button.

NOTE

• If no action is taken for several minutes after

pressing the

Options

button, the display reverts

to the previous screen.

Signal

The volume of the notification sounds and button

sounds can be set from quiet to very loud.
• Default volume is

High

and can be adjusted.

- Volume : Off, Low, Medium, High, Very High

Wi-Fi Connection

Use to set up the Wi-Fi connection. When Wi-Fi is

turned on, the Wi-Fi icon appears in the display.

Cycle Optimization

When activated, this feature organizes the cycle

list and options automatically based on your usage

patterns.
•

is the default setting.

• Selecting

Off

retains the current list order.

Smart Diagnosis

Use this to help troubleshoot errors or

malfunctions.
• See the Smart Diagnosis section for more

details.

Reset Settings

Select this to delete all the stored data and

initialize settings.

Summary of Contents for DL X670 Series

































































Search results

Summary of Contents for DL X670 Series

Reviews:

Related manuals for DL X670 Series

Brands by name

Popular brands

LG DL X670 Series, Owner'S Manual

Search results

Summary of Contents for DL X670 Series

Reviews:

Related manuals for DL X670 Series

Brands by name

Popular brands