13
EN
Charging
Charging the product (with the battery in
the product)
Put the product wheel on the charging stand by aligning
the product wheel on the center-line. To detect the bat-
tery level, the battery indicator of the product will flash
4 times and charge will start.
•
If the battery indicator doesn’t flash after putting the
main unit on the charging stand, the battery is not
charged. Put the product on the charging stand again.
•
When charging is completed, both “Charging indica-
tor” and “Battery indicator” lamps will stop blinking
and remain turned on.
Charging
indicator
Battery indicator
Center-line
Charging the battery (battery only)
Put the detached battery on the charging stand. The
charging indicator of the charging stand will flash and
charge will start.
•
If charge is completed, the charging indicator will be
turned on after flashing.
•
Charge inside the room because charge can fail under
5
℃
.
the charge LED
Installing the Charging Stand
Fix the power line of the charging stand on the floor
surface with proper length, and install the charging stand
on a flat spot.
•
Wind the power line around the power line fixing rack
and power line fixing groove before using the product.
Power line
fixing rack
Power line fixing groove
Checking battery Level
Check the battery level using the battery level LED on
the top of the product before using the product.
•
If the last battery bar flashes, the battery needs
recharge. Please charge the battery using the charging
stand.
1 MFL69727402_en_180316.indd 13
2018-03-15 오전 10:35:54
