31
EN
5
Insert the brush into the brush case, starting
from its right side.
6
Assemble the brush case back on the
nozzle.
NOTE
•
If the brushes have become bent, wrap it in a
wet towel and wait until they have
straightened out. Allow it to dry completely
before reassembling.
−
To avoid corroding the bearings, do not
immerse the brush assembly in water while
cleaning.
•
Dust may pile up at the brush entrance on the
bottom surface. Remove dust from the brush
entrance periodically using a soft brush or
vacuum cleaner.
•
If the suction power has become weaker,
check the suction port for clogs or foreign
materials. Use a stick to remove the foreign
substance.
