25
EN
Using the Smart Diagnosis
Function
Getting Started
The Robot Cleaner uses this Smart Diagnosis
function to run a self-diagnosis. If any
irregularity is found from the diagnosis, please
contact the authorized LG Electronics service
center.
1
Turn on the
Main Power Switch
of the
Robot Cleaner and then dock the Robot
Cleaner on to the Home Station.
•
The Smart Diagnosis function is only
available while the Robot Cleaner is
charging.
2
Remove items within 1 m that are in the
way of the Robot Cleaner.
•
During the Smart Diagnosis, the Robot
Cleaner move approximately within a 50
cm radius.
3
Press the
Diagnosis
button on the Remote
Control and then the process starts with a
voice message.
•
The Robot Cleaner returns back to the
Home Station when the Smart Diagnosis
has finished.
4
The Robot Cleaner announce the result
through a voice message.
•
To repeat the voice message, press the
Home
button.
5
Press the
Start/Stop
button to terminate the
diagnosing process.
•
After the Smart Diagnosis voice message,
the Robot Cleaner will begin recharging
after 1 minute.
•
If an error is detected with any of the
Obstacle Detection Sensors whilst in the
Smart Diagnosis, a voice message will
announce, and the Robot Cleaner will not
return to the Home Station.
