28
MAINTENANCE
Cleaning the Nozzle
Clean the nozzle and rotating brush regularly.
CAUTION
•
Always separate the nozzle from the product
body or remove the battery before cleaning. If
the nozzle starts to operate during cleaning, it
could cause an injury.
•
Keep fingers away from pinch points when
assembling the nozzle on the appliance or the
rotating brush on the nozzle.
•
Do not use the rotating brush as a wet mop. It
may cause product damage.
Cleaning the Power Carpet Nozzle
Clean the brush and roller heads before each use.
•
If the brush contains foreign objects, the brush
may not spin or a noise may occur during
operation.
1
Press the nozzle release button
a
to remove
the nozzle from the extension pipe or product
body.
2
Turn the nozzle upside down and rotate the
cover lock slot
b
counterclockwise.
3
Pull the brush cover forward and pull the
brush out.
4
Attach the crevice tool to the product body
and use the vacuum to remove foreign
objects and dust from the brush and the
bottom of the nozzle.
5
Use a damp towel or cloth to remove any
remaining foreign objects and dust from the
brush and the bottom of the nozzle.
•
Carefully use a tweezers to remove foreign
objects from the nozzle rollers.
•
Do not rinse or submerge the rotating
brush or nozzle in water.
•
Wrap the handle of the cleaning brush with
a wet towel or cloth and use it to clean the
rotating brush and nozzle.
6
Slide the brush back into the nozzle and
rotate the cover back into place. Turn the
cover lock clockwise to lock the cover.
Cleaning the Power Punch Nozzle
1
Press the nozzle release button to remove the
nozzle from the extension pipe or product
body and turn the nozzle upside down.
2
Attach the crevice tool to the product body
and use the vacuum to remove foreign
objects and dust from the bottom of the
nozzle.
•
Use a damp towel or cloth to remove any
remaining foreign objects and dust from
the bottom of the nozzle. After cleaning,
wipe the nozzle dry.
•
Do not rinse or submerge the nozzle in
water.
us_main.book.book Page 28 Tuesday, March 31, 2020 5:28 PM
