LG Cord Zero A90 Series, Owner'S Manual

Page: 16 / 64

16 OPERATION
OPERATION
Getting Started
Before Using the Appliance
• Make sure that the exhaust filter and pre-filter
are properly assembled before using the
appliance.
• Close the dust bin cover properly before using
the appliance. If the dust bin cover is left open,
the suction strength may deteriorate and affect
the cleaning performance.
• This appliance has a built-in safety device to
prevent overheating. If the appliance becomes
overheated after extended use, it may
automatically turn off. If this occurs, leave the
appliance in a cool, well-ventilated area for
about an hour before turning on the power
again.
• Make sure to remove any foreign object such as
a sock or stocking before using the appliance.
Any foreign object on the inlet port or extension
pipe will prevent the appliance from functioning
properly.
• Environmental conditions such as temperature
and humidity may cause static electricity to
accumulate on the appliance. Please contact LG
Electronics customer information center if the
problem persists.
• Please use the product at normal room
temperatures as the battery runtime may
deteriorate severely if used at temperatures
lower than 41 °F (5°C) or higher than 100 °F
(38°C) for an extended period of time.
• Do not use the appliance to suck up oils or any
liquids, including water.
• Support the bottom of the appliance when
cleaning an elevated surface.
• Store the appliance in the charging station or
place it flat on the floor when not in use. Leaning
the appliance against a wall or chair can result in
product damage or personal injury if the
appliance falls.
• To avoid scratches on polished floors, keep the
brushes of the nozzles and tools free from grit,
sand, or abrasive objects.
• Refer to the Specifications section for battery
runtime details.
• The battery runtime is dependent on the surface
type and the suction power.
• Follow manufacturer’s recommendations when
cleaning flooring, carpets, and rugs.
• Do not use tools to clean a TV, monitor or LCD
display as they may scratch these surfaces.
Assembling Attachments
Nozzles and tools can be attached to either the
product body or the end of the extension pipe.
CAUTION
• Running the appliance for a long period of time
with a tool connected may cause the motor to
overheat.
• This appliance has a built-in safety device to
prevent overheating. If the appliance becomes
overheated after extended use, it may
automatically turn off. If this occurs, leave the
appliance in a cool, well-ventilated area for
about an hour before turning on the power
again.
• Do not use the Kompressor lever while the
appliance is running. Doing so may cause
product damage.
1
Insert the fully charged battery
a
into the
cavity at the bottom of the handle on the
product body.
2
Attach the nozzles, tools, or extension pipe by
sliding them onto the inlet
b
on the body
until they click into place. The nozzles and
tools can also be attached to the end of the
extension pipe
b
.
• Detach the accessories by pressing the
release button
c
.
us_main.book.book Page 16 Tuesday, December 15, 2020 3:58 PM