LG Cord Zero A90 Series, Owner'S Manual

Page: 12 / 64

12 INSTALLATION
Installing the Charging
Station
WARNING
• To prevent tipping, self-standing mode
installations should be anchored to the wall
using the provided stand anchoring screw,
anchoring block and double-sided tape.
CAUTION
• Do not allow children or pets to hang onto the
charging station. They could be injured or cause
damage to the appliance.
• Take care not to drop the product parts while
unpacking them to avoid appliance damage or
personal injury.
• Do not use double-sided tape to attach the
charging station to wallpaper. The weight of the
charging station and the product body could
damage the paper.
• Use the stand anchoring screw on concrete or
solid walls. If the appliance is not anchored
securely and falls, it could result in damage to
property or the product.
NOTE
• Once assembled, the floor stand dock and the
floor stand pipe cannot be disassembled.
• The cost of a service call to install or reinstall the
charging station is not covered under the
warranty.
Self-Standing Installation
Follow the steps below to install the charging
station on a hard and level floor.
CAUTION
• Keep fingers away from pinch points when
assembling the appliance or the charging
station.
NOTE
• The charging station can be removed as needed.
To remove it, hold the floor stand dock steady
and pull up on the charging station.
1
Place the floor stand dock on a hard and level
floor and assemble the floor stand pipe.
2
Clip the power cord tidily into the cord keeper
a
on the back of the floor stand pipe.
us_main.book.book Page 12 Tuesday, December 15, 2020 3:58 PM