background image

4

Convertible & Ceiling suspended Air Conditioner

Safety Precautions

When flammable gas leaks, turn off the
gas and open a window for ventilation
before turn the product on.

• Do not use the telephone or turn switches on

or off. There is risk of explosion or fire.

If strange sounds, or small or smoke
comes from product. Turn the breaker
off or disconnect the power supply
cable.

• There is risk of electric shock or fire.

Stop operation and close the window in
storm or hurricane. If possible, remove
the product from the window before the
hurricane arrives.

• There is risk of property damage, failure of

product, or electric shock.

Do not open the inlet grill of the product
during operation. (Do not touch the
electrostatic filter, if the unit is so
equipped.)

• There is risk of physical injury, electric shock,

or product failure.

When the product is soaked (flooded or
submerged), contact an Authorized
Service Center.

• There is risk of fire or electric shock.

Be cautious that water could not enter
the product.

• There is risk of fire, electric shock, or product

damage.

Ventilate the product from time to time when operating it
together with a stove, etc.

• There is risk of fire or electric shock.

Turn the main power off when cleaning or maintaining the
product.

• There is risk of electric shock.

When the product is not be used for a long time, disconnect the
power supply plug or turn off the breaker.

• There is risk of product damage or failure, or unintended operation.

Take care to ensure that nobody could step on or fall onto the
outdoor unit.

• This could result in personal injury and product damage.

Always check for gas (refrigerant)
leakage after installation or repair of
product.

• Low refrigerant levels may cause failure of

product.

Install the drain hose to ensure that water
is drained away properly.

• A bad connection may cause water leakage.

Keep level even when installing the
product. 

• To avoid vibration or water leakage.

Do not install the product where the
noise or hot air from the outdoor unit
could damage the neighborhoods.

• It may cause a problem for your neighbors.

Use two or more people to lift and
transport the product. 

• Avoid personal injury.

Do not install the product where it will be
exposed to sea wind (salt spray) directly.

• It may cause corrosion on the product.

Corrosion, particularly on the condenser and
evaporator fins, could cause product
malfunction or inefficient operation.

Do not expose the skin directly to cool air
for long periods of time. (Don't sit in the
draft.)

• This could harm to your health.

Do not use the product for special
purposes, such as preserving foods, works
of art, etc. It is a consumer air conditioner,
not a precision refrigeration system.

• There is risk of damage or loss of property.

Do not block the inlet or outlet of air flow.

• It may cause product failure.

Use a soft cloth to clean. Do not use
harsh detergents, solvents, etc.

• There is risk of fire, electric shock, or damage

to the plastic parts of the product.

Do not touch the metal parts of the
product when removing the air filter.
They are very sharp!

• There is risk of personal injury.

Do not step on or put anyting on the
product. (outdoor units)

• There is risk of personal injury and failure of

product.

Summary of Contents for Convertible & Ceiling suspended Air Conditioner


















Reviews: