background image

Owner's Manual 

3

Safety Precautions

Safety Precautions

To prevent injury to the user or other people and property damage, the following instructions must be followed.

Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified by
the following indications.

This symbol indicates the possibility of death or serious injury.

This symbol indicates the possibility of injury or damage.

Do not use a defective or underrated
circuit breaker. Use this appliance on a
dedicated circuit.

• There is risk of fire or electric shock.

For electrical work, contact the dealer,
seller, a qualified electrician, or an
Authorized Service Center.

• Do not disassemble or repair the product.

There is risk of fire or electric shock.

Always ground the product.

• There is risk of fire or electric shock.

Install the panel and the cover of control
box securely.

• There is risk of fire or electric shock.

Always install a dedicated circuit and
breaker.

• Improper wiring or installation may cause fire

or electric shock.

Use the correctly rated breaker or fuse.

• There is risk of fire or electric shock.

Do not modify or extend the power cable.

• There is risk of fire or electric shock.

Do not install, remove, or re-install the
unit by yourself (customer).

• There is risk of fire, electric shock, explosion,

or injury.

Be cautious when unpacking and
installing  the product.

• Sharp edges could cause injury. Be

especially careful of the case edges and the
fins on the condenser and evaporator.

For installation, always contact the dealer
or an Authorized Service Center.

• There is risk of fire, electric shock, explosion,

or injury.

Do not install the product on a defective
installation stand.

• It may cause injury, accident, or damage to

the product.

Be sure the installation area does not
deteriorate with age.

• If the base collapses, the air conditioner could

fall with it, causing property damage, product
failure, and personal injury.

Do not let the air conditioner run for a
long time when the humidity is very high
and a door or a window is left open.

• Moisture may condense and wet or damage

furniture.

Take care to ensure that power cable
could not be pulled out or damaged
during operation.

• There is risk of fire or electric shock.

Do not place anything on the power
cable.

• There is risk of fire or electric shock.

Do not plug or unplug the power supply
plug during operation.

• There is risk of fire or electric shock.

Do not touch(operate) the product with
wet hands.

• There is risk of fire or electrical shock.

Do not place a heater or other appliances
near the power cable.

• There is risk of fire and electric shock.

Do not allow water to run into electric
parts.

• It may cause  There is risk of fire, failure of

the product, or electric shock.

Do not store or use flammable gas or
combustibles near the product.

• There is risk of fire or failure of product.

Do not use the product in a tightly closed
space for a long time.

• Oxygen deficiency could occur.

Summary of Contents for Convertible & Ceiling suspended Air Conditioner


















Reviews: