Operating
29
Oper
ating
3
Using Microphone
It is available on the function as follows : CD, USB,
AUX-MIC and BLUETOOTH.
1. Connect your microphone to the MIC jack.
2. Play the music you want.
3. Sing along with the accompaniment. Adjust
the microphone volume by rotating
MIC VOL.
clockwise or unclockwise on the unit.
y
When not using the microphone, set the
MIC VOL.
to minimum or turn off the MIC
and remove the microphone from the MIC
jack.
y
If the microphone is set too near the
speaker, a howling sound may be produced.
In this case, move the microphone away
from the speaker or decrease the sound
level by using the
MIC VOL.
.
y
If sound through the microphone is
extremely loud, it may be distorted. In this
case, rotate
MIC VOL.
to minimum.
y
AUX-MIC function enables only your voice
to output.
,
Note
Switching on and off the BEAT
LIGHTING
BEAT LIGHTING : The function is to light
automatically to the music sound when music is
being played.
You can select on/off mode of the speaker light by
pressing
BEAT LIGHTING/DEMO
on the unit.
Using X-FLASH
X-FLASH : The function is to create an atmosphere
of Club by operating lighting automatically or
manually when a strong beat music is being played.
1. Press the
X-FLASH
on the unit.
2. You can X-FLASH level by pressing the
X-FLASH
.
The display window changes each time
OFF-> LEVEL1 ->LEVEL2-> LEVEL3-> LEVEL4 ->
OFF
3. Play the level you want.
y
X-FLASH function enables in all functions.
y
X-FLASH mode is retained previous mode
when you press the
X-FLASH.
y
X-FLASH effect depend on the LEVEL.
y
The BEAT LIGHTING and X-FLASH may not
work properly according to Low Input level
or Connected external device (Low Volume,
Device Type, Play sound source, connection
mode, etc.).
y
The BEAT LIGHTING and X-FLASH (Level 1)
are the LED lights up only during operation
(Disc playback, USB playback, Radio
Listening, and other external input). It is only
possible when the unit is in operation.
,
Note
CM9540-FB_DLKALLK_ENG.indd 29
2014-04-09 �� 3:05:11