manualshive.com logo in svg

LG CJ44, Service Manual

Share
Download
LG CJ44 Service Manual Download Page 8

1-7

2. HIDDEN KEY MODE DESCRIPTION

2-1. Version Check

- Function : Version Check.
- Entrance Key : Front ‘Stop’ + Remote Control Key ‘Play’ for 5s.
- Exit Key : Remote Control Key ‘Play’ for 1.5s.
- Operation explanation : Remote Control Key     OR    .

VFD Display (Example)

Result

MCS Version

MICOM Version

OPTION Version

DEMO Version

DJ PRO Version

EQ Version

EQ Check sum Version

2-2. EEPROM Initial

- Function : Initialize data stored in EEPROM and BACKUP RAM data.
- Entrance Key : Front ‘Stop’ + Remote Control Key ‘   ‘ for 5s.
- Exit Key : Auto exit.
- Explanation : ‘E2P CLR’ is displayed on the VPD and turn off the power automatically.

2-3. OPTION EDIT (EEPROM)

- Refer to the page 00.

2-4. APD Test Display

- Function : Auto Power Down timer is displayed on VFD.
- Entrance Key : Front ‘Stop’ + Remote Control Key ‘3’ for 5s.
- Exit Key : Auto Exit.
- Explanation : display APD Timer HH=(hour) MM=(min), SS=(sec).

Summary of Contents for CJ44


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands