manualshive.com logo in svg

LG CJ44, Service Manual

Share
Download
LG CJ44 Service Manual Download Page 35

 3-8

ONE POINT REPAIR GUIDE

NO OPERATION OF MD

When no sound output in the CD function, you can not listen to music reading data from a CD disc if 
the servo motors in MD don’t work. This step is for checking the TRAY OPEN / CLOSE MOTOR among 
them.

4-3. TRAY OPEN / CLOSE MOTOR

4-3-1. Solution

Please check and replace IC400, IC401 on MAIN board.

4-3-2. How to troubleshoot (Countermeasure)

1) Check MOT_OPEN & MOT_CLOSE signals from Pin K4, L4 of IC500 to IC400.



 If no signal, check +1.8 V & + 5 V to IC401.

2) Check LOAD± from IC401 to CN401 for driving the tray open / close motor. It is about 3.85 Vp-p.



 If no signal, check +5 V to IC401. If it has any trouble, replace it with a new one.

3) Check if the FFC cable is solidly connected between CN401 and MD.
4) Check the MD.



 If the tray motor is sort-circuit or has any trouble, it can not open or close the tray.

       Please check the function after changing another MD.

4-3-3. Service hint (Any picture / Remark)

LO- TO CN401

LO+ TO CN401

MOT_OPEN

CLOSE

< Waveform for driving 

TRAY open / close motor >

< Signal check point >

Summary of Contents for CJ44


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands