Terminal Development Center
20
LGIC
Automatic Answer Function
1. What is Automatic Answer Function?
It is a function to store the conversation message of the counterpart through the automatic
answering by the terminal when there is a call.
2. Operation Concept
(1) Once the automatic answering function has been set, a message of
‘ Auto Answering…
:
(
’ is displayed on the LCD display.
(2) Upon a call, the bell rings once (But bell is muted), the automatic announcement is
released and then the message of the counterpart is recorded.
(3) There are two types of message as follows.
- Basic Message: A message of [Sorry but I’ m not in a position to answer
the call, please leave a message] is released.
- Recorded Message: You can store a message that you want for automatic answering
and some 10-second long of message can be stored.
(4) You can store the message of counterpart for around 30 seconds in the recording mode
and up to 3 messages can be stored.
(5) If you want to call by interrupting the recording while recording, you just press
SEND
key in the course of a call.
(6) If there are 3 messages already in the memory, those existing messages are
automatically deleted.
(7) Once the received messages are stored in the memory, ‘ Automatic Answer:
(
’ is
displayed in the state of idle unless you verify or delete messages.
3. Menu Configuration (Menu 6 – 5)
(1) Automatic Answer Setup (Menu 6 + 5 + 1)
