Terminal Development Center
17
LGIC
1. Using Voice Recognition Function
*
For using the voice recognition dialing function, there should be a voice available
that was previously stored in the memory through the voice learning process. And
the voice recognition function should be set through ‘ Menu 6 + 5’
1) Voice Learning
l
This function is performed following the procedures for the conventional telephone
number storing.
l
Voice learning should be conducted in a silent place with no noise for high recognition
rate and 2 times of learning should be made respectively.
l
As the voice data learned in the phone mode and that learned in the hands-free mode
are different in their characteristic, you should store the recognized data separately.
For storing these 2 voice data in one address, you should store one of voice data firstly
according to the following procedure and add the other one through the process of the
voice editing.
<Storing procedures are as follows>
[Storing procedures related to PIM function]
Set up the secret status
Press
DEL
key
Set up the voice recognition
Press
STORE
key
“ Your name, please“
Enter your name in voice
