1.4 FEATURES
• Designed for cooling only.
• Powerful and quiet cooling.
• Slide-in and slide-out chassis for the simple
installation and service.
1.5 CONTROL LOCATIONS
• VENTILATION
The ventilation lever must be in the CLOSE position
in order to maintain the best cooling conditions.
When a fresh air is necessary in the room, set the
ventilation lever to the OPEN position.
The damper is opened and room air is exhausted.
NOTE: Before using the ventilation feature,
make the lever, as shown. First, pull down
part
to horizontal line with part
.
• THERMOSTAT
Thermostat will automatically control the
temperature of the room. Select the higher number
for the lower temperature of the room. The
temperature is selected by positioning the knob to
the desired position.
The 5 or 6 position(middle position) is a normal
setting for average conditions.
• OPERATION
OFF
(
)
: Turns the air conditioner off.
MED FAN
( )
: Permits the medium fan speed
operation without cooling.
LOW FAN
( )
: Permits the low fan speed
operation without cooling.
HIGH COOL ( )
: Permits cooling with the
high fan speed operation.
MED COOL ( )
: Permits cooling with the
medium fan speed
operation.
LOW COOL ( )
: Permits cooling with the low
fan speed operation.
• AUTO SWING
ON
(
): Air swing is operated while OPERATION
knob is set to the COOL position.
OFF ( ): Stops the operation of air swing.
• Side air-intake, side cooled-air discharge.
• Built in adjustable THERMOSTAT.
• Washable one-touch filter.
• Compact size.
—4—
Part A
Part B
VENT
CLOSE
OPEN
0
6
7
8
9
5
1
2
Off
On
Med
Fan
Off
Low
Fan
High
Cool
Med
Cool
Low Cool
Auto Swing
3
4
Thermostat
Operation
0