33
ENGLISH
Problem
Possible Causes
Corrective Action
The air conditioner
does not emit cool air.
Air is not circulating properly.
•
Make sure that there are no curtains,
blinds, or pieces of furniture blocking the
front of the air conditioner.
The air filter is dirty.
•
Clean the air filter once every 2 weeks.
•
See “Cleaning Air Filter” for more
information.
The room temperature is too high.
•
In summer, cooling the indoor air fully
may take some time. In this case, select
the Jet Mode to cool the indoor air
quickly.
Cold air is escaping from the room.
•
Make sure that no cold air is escaping
through the ventilation points in the room.
The desired temperature is higher
than the set temperature.
•
Set the desired temperature to a level
lower than the current temperature.
There is a heating source nearby.
•
Avoid using heat generators like electric
ovens or gas burners while the air
conditioner is in operation.
Fan Mode is selected.
•
During Fan Mode, air blows from the air
conditioner without cooling or heating the
indoor air.
•
Switch the operation mode to cooling
operation.
Outside temperature is too high.
•
The cooling effect may not be sufficient.
The fan speed cannot be
adjusted.
The Jet Mode, or Auto Operation
Mode is selected.
•
In some operation modes, you cannot
adjust the fan speed. Select an operation
mode in which you can adjust the fan
speed.
The temperature cannot
be adjusted.
The Fan Mode or Jet Mode is
selected.
•
In some operation modes, you cannot
adjust the temperature. Select an
operation mode in which you can adjust
the temperature.
The air conditioner stops
during operation.
The air conditioner is suddenly turned
off.
•
The Timer Function may have timed out,
which turns the unit off. Check the timer
settings
A power failure has occurred during
operation.
•
Wait for the power to come back. If you
have the Auto Restart function enabled,
your unit will resume its last operation
several minutes after power is restored
.
The indoor unit is still
operating even when
power has been turned
off.
The Auto Clean function is being
operated
•
Allow the Auto Clean function to continue
since it removes any remaining moisture
inside the indoor unit. If you do not want
this feature, you can turn the unit off
Summary of Contents for BSNQ126B4A2
Page 35: ...Memo ...
Page 36: ......
