Appendix
Installation Manual
27
E
N
G
LIS
H
10) Total operation/stop air conditioner indoor unit
Function
Total stop command input
Input
Using NV
Network input variable : SNVT_switch nviTotalONOFF_indoor
Operation
It turns ON or OFF all the indoor units.
11) Total operation/stop ventilation indoor unit
Function
Total stop command input
Input
Using NV
Network input variable : SNVT_switch nviTotalONOFF_indoor
Operation
It turns ON or OFF all the ventilation units.
0 = Not used
value
1 = Quick mode
2 = Power save mode
3 = Heat
9) Ventilation function command (Only applies to ventilation product)
Valid Range
SNVT_count
( Index : 8 )
NV
Filed
Operation
Function
Ventilation user operating mode input
Input
Using NV
Network input variable : SNVT_count nviUser_n
Operation
It controls the product function of each ventilation product.
Function
Ventilation user operating mode status
Output
Using NV
Network output variable : SNVT_count nvoUser_n
Operation
It monitors the function status of each ventilation product.
value
not used
state
1 = All ON indoor/Vent unit
0 = All OFF indoor/Vent unit
Default Value
Valid Range
SNVT_switch
( Index : 95 )
NV
Filed
Operation
Summary of Contents for BNU-LW
Page 28: ...Memo 28 Lonworks Gateway ...