LG BH4120SN Page 35 Service Manual Download

Page: 35 / 103

2-26

DIGITAL DISPLAY & MEDIA TRAINING MASTER

6. BD-HTS

6-1. Slow Loading Times for BDs

Why does it take so long to load

my BDs?

The loading times for a blu-ray disc is 30 seconds. When a customer
switches from one disc to another, the lens will change which is what

causes the delay. Blu Ray require different lasers to read the discs.

Why does it take so long to boot

my BD?

The booting times for the BD is 20 seconds. When the set is booted,

it takes a little long time to loading the OS program.

6-2. Booting Times

6-3. Ethernet Port

What is the purpose of the

ethernet port on BD-HTS?

This is used for the unit to access a network dealing with interactive BD

movie menu. BD-HTS can support BD2.0 so that network function is

active in the BD disc. Also, BD-HTS can support VOD service such as

Netflix (USA only).

Why is not the item downloaded

through the network?

Make sure the customer insert the LAN cable into the Ethernet jack.

Make sure the network is active. If it is active, the disc may have a

problem.

If not active, see the network section of OM.

Is there a firmware update

available for BD-HTS?

Yes, firmware updates are available at

http://us.lgservice.com

that

address some playback issues with movies. Go to device drivers and click

on DVD&VIDEO&SET-TOP. The firmware updates are available there.

Advise the customer to download the firmware and unzip the file.

Also, firmware updates are done by network. Select Home Menu -> Setup

-> Others -> Software update menu.

6-4. Firmware Update Availability

Summary of Contents for BH4120SN








































































































Search results

Summary of Contents for BH4120SN

Reviews:

Related manuals for BH4120SN

Brands by name

Popular brands

LG BH4120SN, Service Manual

Search results

Summary of Contents for BH4120SN

Reviews:

Related manuals for BH4120SN

Brands by name

Popular brands