LG BH4120SN Service Manual Download Page 28

Page: 28 / 103

2-19

DIGITAL DISPLAY & MEDIA TRAINING MASTER

5-3. Unit Locks Up

Unit does not respond to any commands.

Does the unit respond to the

buttons on the unit?

YES

If the unit will turn on or off with the button on the unit, troubleshoot the

remote control. Please refer to

Remote Control Not Working

call flow.

Has the customer reset the unit?

If the unit does no respond to any buttons, then reset the unit by

unplugging it for 15 to 30 seconds. If the unit does not respond after the

reset, arrange for service on the BD.

Does the open/close button on

the unit work?

YES

Press the open/close button on the unit. If the disc ejects, troubleshoot the

remote using the

Remote Control Not Working

call flow.

Has the customer reset the unit?

Ask the customer to reset the unit by unplugging the unit from the

electrical outlet for 15 to 30 seconds. If the disc remains stuck in the unit

after the reset, the unit will need service.

5-4. Disc Stuck

A BD disc is stuck in the unit.aa

Summary of Contents for BH4120SN








































































































Search results

Summary of Contents for BH4120SN

Reviews:

LG BH4120SN, Service Manual, Page: 28 / 103

Search results

Summary of Contents for BH4120SN

Reviews: