- 19 -
Copyright ©2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
Connect the cable to the Indoor unit.
Connecting the cable between indoor unit and outdoor unit
Connecting the cable between indoor unit and outdoor unit
Connect the cable to the indoor unit by connecting the wires to the terminals on the control board individually
according to the outdoor unit connection. (Ensure that the color of the wires of the outdoor unit and the terminal No.
are the same as those of the indoor unit.)
• The above circuit diagram is subject to change without notice.
• The earth wire should be longer than the common wires.
• When installing, refer to the circuit diagram behind the panel front of the indoor unit.
• Connect the wires firmly so that they may not be pulled out easily.
• Connect the wires according to color codes, referring to the wiring diagram.
If a power plug is not used, provide a circuit
breaker between power source and the unit as
shown by.
The power cord connected to the "A" unit should be selected according to the following specifications(Type "B"
approved by HAR or SAA).
The power connecting cable connecting the indoor and outdoor unit should be selected according to the following
specifications (Type "B" approved by HAR or SAA).
Air
Conditioner
Main power source
24k
2.5
Unit(A)
Indoor
Cable Type(B)
H05VV-F
NORMAL CROSS
-SECTIONAL AREA
Grade
(mm
2
)
24k
2.5
Cable Type(B)
H07RN-F
NORMAL CROSS
-SECTIONAL AREA
Grade
(mm
2
)
Circuit Breaker
Use a circuit
breaker or time
delay fuse.
Summary of Contents for AS-W2465DH0
Page 70: ...P No 3828A20462R July 2008 ...
