28
Operation
Oper
ation
4
Bass Blast
You can set the BASS BLAST sound mode
directly.
Press
BASS BLAST
repeatedly.
Display
Description
BASS BLAST
During playback, reinforces
the bass sound.
BYPASS
You can enjoy the sound
without equalizer effect.
Setting the USER EQ
You can listen to music with desired sound
effect by adjusting the BASS, MIDDLE and
TREBLE.
1.
Press
USER EQ
on the front panel.
“USER EQ” appears on the display window.
2.
Press
PLAY / PAUSE
on the front panel
while the “USER EQ” is displayed in the
display window.
3.
Select the BASS, MIDDLE or TREBLE by
pressing
ENTER
on the front panel.
4.
Rotate
MULTI CONTROL
on the front panel
to set sound level.
5.
Press
PLAY / PAUSE
on the front panel to
finish the settings.
Listening to FM/AM
radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and AM
antennas to the unit. (Page 20)
Automatic tuning
1.
Rotate
INPUT SELECTION
to select tuner
(FM or AM). Or press
RADIO
with the
remote control to select tuner (FM or AM).
2.
Press
TUNING -
or
for more than
2 seconds.
Press
TUNING -
for more than 2 seconds to
scan from high to low.
Press
for more than 2 seconds to
scan from low to high.
The unit stops scanning whenever a station
is received.
In case of poor FM stereo reception
If the FM stereo reception is poor and “ST.”
flashes in the display window, select monaural
audio so that the sound will be less distorted
by pressing the
MONO/STEREO
.
The “ST.” indicator disappears in the display
window. There will be no stereo effect, but the
reception will improve. Press the button again
to restore the stereo effect.
Manual tuning
Press
TUNING -
or
briefly and
repeatedly on the FM or AM mode to select a
station you want. Or rotate
MULTI CONTROL
on the unit.
AR936TS-AH_DNGAFLX_ENG.indd 28
2013-09-09 11:20:23
