background image

Installation Manual  

7

Safety Instructions

ENGLISH

• Means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
• If you eat the liquid from the batteries, brush your teeth and see doctor. Do not use the remote if the

batteries have leaked.
- The chemicals in batteries could cause burns or other health hazards.

• Replace the all batteries in the remote control with new ones of the same type. Do not mix old and

new batteries or different types of batteries.
- There is risk of fire or explosion.

• Stop operation and close the window in storm or hurricane. If possible, remove the product from the

window before the hurricane arrives.
- There is risk of property damage, failure of product, or electric shock.

• Take care to ensure that nobody could step on or fall onto the outdoor unit.

- This could result in personal injury and product damage.

• Take care to ensure that power cable could not be pulled out or damaged during operation.

- There is risk of fire or electric shock.

• The appliance shall be stored in a well-ventilated area where the room size corresponds to the room

area as specified for operation. (for R32)

• To prevent the mixing of different types of refrigerants, be sure to check the type of refrigerant used in

the outdoor unit.

• Turn the main power off when cleaning or maintaining the product.

- There is risk of electric shock.

• Use a firm stool or ladder when cleaning or maintaining the product.

- Be careful and avoid personal injury.

• Use a soft cloth to clean. Do not use harsh detergents, solvents, etc.

- There is risk of fire, electric shock, or damage to the plastic parts of the product.

• Ventilate the product from time to time when operating it together with a stove, etc.

- There is risk of fire or electric shock.

• When flammable gas leaks, turn off the gas and open a window for ventilation before turn the product

on.
- Do not use the telephone or turn switches on or off. There is risk of explosion or fire.

• When the product is not be used for a long time, disconnect the power supply plug or turn off the

breaker.
- There is risk of product damage or failure, or unintended operation.

• When the product is soaked (flooded or submerged), contact an Authorized Service Center.

- There is risk of fire or electric shock.

• Servicing shall only be performed as recommended by the equipment manufacturer. Maintenance and

repair requiringthe assistance of other skilled personnel shall be carried out under the supervision of
the person competent in the use offlammable refrigerants. (for R32)

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly

qualified persons in order to avoid a hazard.

Operation

• Do not expose the skin directly to cool air for long periods of time. (Don't sit in the draft.)

- This could harm to your health.

• Do not insert hands or other objects through the air inlet or outlet while the product is operated.

- There are sharp and moving parts that could cause personal injury.

• Do not store or use flammable gas or combustibles near the product.

- There is risk of fire or failure of product.

• Do not install the product where it will be exposed to sea wind (salt spray) directly.

- It may cause corrosion on the product. Corrosion, particularly on the condenser and evaporator fins,
could cause product malfunction or inefficient operation.

• Do not install the product where the noise or hot air from the outdoor unit could damage the

neighborhoods.
- It may cause a problem for your neighbors.

Summary of Contents for ARNU36GTYB4





























Reviews: