Installation Manual
17
Installation
ENGLISH
Power supply cord
Transmission cord
Remote controller cord
Power supply cord
Transmission cord
Remote
controller cord
Power supply cord
Transmission cord
Remote
controller cord
Clamp Cord
Remote Controller Connector
(CN-REMO)
Clamp Cord
Remote Controller Connector
(CN-REMO)
<TM/TN/TP>
Round
<TY>
Round
<TY>
<TM-A/TP-B>
4 Way
<TM/TN/TP>
<TM-A/TP-B>
• Connect the wires to the terminals on the control box individually according to the outdoor unit connection.
• Ensure that the color of the wires of outdoor unit and the terminal No. are the same as those of indoor unit
respectively.
Wiring Connection
CAUTION
• Tighten the nut and bolt to prevent the unit from falling.
• When mechanical connectors are reused indoors, sealing parts shall be renewed. (for R32)
• When flared joints are reused indoors, the flare part shall be re-fabricated. (for R32)
!
• While connecting wired remote controller, insert its connector to the "CN-REMO" housing of the main PCBA
and make the remote controller cord tightly by using clamp cord.
4 Way
Remote controller cord
Power supply cord
Transmission cord
Wired remote controller
connector
Summary of Contents for ARNU24GTYA4
Page 32: ...32 Indoor Unit ...