INSTALLATION
21
ENGLISH
Installation of Indoor Unit
1
Hook the indoor unit onto the upper
portion of the installation plate. (engage
the three hooks at the top of the indoor
unit with the upper edge of the installation
plate) Ensure that the hooks are properly
seated on the installation plate by moving
it left and right
2
Unlock the tubing holder from the chassis
and mount between the chassis and
installation plate in order to separate the
bottom side of the indoor unit from the
wall.
* The feature can be changed according to
type of model.
Piping
1
Insert the connecting cable through the
bottom side of indoor unit and connect the
cable (You can see detail contents in
'Connecting the cables' section)
<Left side piping>
<Right side piping>
2
Secure the cable onto the control board
with the cable retainer.
3
Tape the tubing pipe, drain hose and the
connection cable. Be sure that the drain
hose is located at the lowest side of the
bundle. Locating at the upper side can
cause overflow from the drain pan through
the inside of the unit.
<Left side piping>
<Right side piping>
* The feature can be changed according to
type of model.
View
Slide up the metal
plate cover
Terminal block of indoor unit
1(L)
2(N)
3(A)
4(B)
Indoor power input
Outdoor unit
Installation plate
Tubing Holder
View
Slide up the metal
plate cover
Terminal block of indoor unit
1(L)
2(N)
3(A)
4(B)
Indoor power input
Outdoor unit
Drain hose
Connecting pipe
Connecting
cable
Tape
Drain hose
Connecting pipe
Connecting
cable
Tape
Drain hose
