FLOOR STANDING | 9
Floor Standing
Due to our policy of continuous product innovation, some specifications may change without notification.
©
LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
FLOOR STANDING
Mechanical Specifications
Controls Features
• Auto changeover (Heat Recovery only)
• Auto operation
• Auto restart
• External on/off control
• Dual thermistor control
• Dual set-point control*
• Filter life and power consumption display*
• Multiple auxiliary heater applications*
• Fan speed control
• Group control
• Hot start
• Self diagnostics
• Timer (on / off)
• Weekly schedule
or unit-mounted local controllers and/or a wall-mounted remote
temperature sensor. The unit microprocessor is capable of accepting
space temperature readings concurrently or individually from either:
1. Wall or unit mounted wired controller(s)
2. Factory mounted return air thermistor or the optional wall-
mounted wired remote temperature sensor
The microprocessor controls space temperature using the value pro-
vided by the temperature sensor sensing a space temperature that
is farthest away from the temperature set-point. The microprocessor
control provides a cooling or heating mode test cycle that operates
the unit for 18 minutes without regard to the space temperature. If
the system is provided with an optional local or central controller,
displayed diagnostic codes are specific, alpha numeric, and provide
the service technician with the reason for the code displayed.
Handling Condensate
The unit is designed to provide gravity draining of condensate. LG
provides a factory insulated flexible drain hose. If condensate lifts/
pumps are needed for the application, they are to be field-provided.
Condensate float safety switch connections are available on the
main control board for connection of a field supplied float safety
switch.
Condensate Drain Pan
The condensate drain pan is constructed of expandable polystyrene
resin (EPS).
Coil
The indoor unit coil is constructed with grooved design copper tubes
with slit coil fins, two (2) rows, nineteen (19) fins per inch.
*To enable Generation 4 features, outdoor unit DIP Switch No. 3 must
be set to ON. Please refer to the Multi V IV, Multi V Water IV , Multi V S
Engineering Manual for additional information.