GUIDELINES | 55
Application Guidelines
Due to our policy of continuous product innovation, some specifications may change without notification.
©
LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
APPLICATION GUIDELINES
Selecting the Best Location / General Mounting - Floor Standing
Figure 33: Selecting the Best Location / Minimum Clearance Require-
ments — Ceiling Suspended Indoor Units.
Figure 34: Selecting the Best Location / Minimum Clearance Require-
ments — Convertible Surface Indoor Units.
More than
27-9/16 inches
More than
11-13/16 inches
More than
27-9/16 inches
More than
7-7/8 inches
More than
2 inches
More than
7-7/8 inches
More than
7-7/8 inches
More than 2 inches
More than
7-7/8 inches
Ceiling Mounting Installation
Wall Mounting Installation
General Mounting - Floor Standing Indoor Units
Figure 35: Bolt Pitch for Floor Standing Indoor Units.
• The unit requires a minimum clearance of 3-15/16 below the unit for air intake.
• Verify that the floor standing indoor unit is level so that drainage flows smoothly. If there is an incline, water may leak.
• Depending on the shape and type of the wall surface, the indoor unit operating sound may be louder.
7-13/16
A
7-5/8
Unit: Inch
Table 35: Location of the Wall Bolts for Floor Standing Indoor Units.
Indoor Unit
A (Inch)
Floor Standing Cased and Uncased CEA / CEU Frames
33-3/4
Floor Standing Cased and Uncased CFA / CFU Frames
44-3/4
1. To provide stabilization, floor standing indoor units need to be
secured to a wall. Ensure the wall is strong enough to bear the
weight of the unit. If necessary, reinforce the wall before installing
the unit.
2. Mark the appropriate location on the wall for the holes, then drill
the holes.
3. Apply the installation mount and install the Floor Standing indoor
unit.