LG Aria LDK 300 User Manual Download

Page: 55 / 87

GDK-162/100/FPII/20W & LDK-24/100/300/300E WOTS
Wireless Terminal (GDC-345H) User Guide

To correct an edited letter during editing,

Flash

( ) button, then last edited letter is

deleted. The deletion takes place from right to left.
For example,

Enter Name

Non

Flash

( ) button make the message as the follow.

Enter Name

NO_

Hold the

Flash

( ) button for over one second to back to the pre-dialing state. But the

telephone number is still there.
Up to ten characters for a name can be written.

Press the

Function

( ) button to save the editing, then the following message will be

shown.

SavePosition

[XX]

If there is no more space to save, the below message be displayed.

SavePosition

Memory Full

To overwrite one of the saved numbers, assign a position from 1 to 30 then the following
message will be shown.

SavePosition

[XX]

Then press

( ) button and the following message will be shown.

Cell used

Replace?

Then press Function button to replace the old one with the new one. If the Flash ( )
button is pressed instead of the Function button, the new number and the name will be
canceled and it will go back to phone book edit state.

2) Retrieving and Calling

Using Phonebook menu procedure.

Press

MENU

(

( ) or

DOWN

( ) button.

Main Menu is displayed on the LCD.

Press (or set ‘

mark to ‘

7 Phonebook

’ by pressing

( ) button or

DOWN

( )

button and press

( ) button.

Phonebook Menu is displayed on the LCD.

Press (or set ‘

’ mark to ‘

1 Dial

’ by pressing

( ) button or

DOWN

( ) button and

press

button). Name and number displayed as follow,

01] ABCDEFGH

XXXXXXXXXXXX

４９

Summary of Contents for Aria LDK 300
























































































Search results

Summary of Contents for Aria LDK 300

Reviews:

Related manuals for Aria LDK 300

Brands by name

Popular brands

LG Aria LDK 300, User Manual

Search results

Summary of Contents for Aria LDK 300

Reviews:

Related manuals for Aria LDK 300

Brands by name

Popular brands