LG Aria LDK 300, User Manual

Page: 52 / 87

GDK-162/100/FPII/20W & LDK-24/100/300/300E WOTS
Wireless Terminal (GDC-345H) User Guide
Ring Type Selection & Ring Volume Setting Function
The intercom ring melody and the CO(outside) ring melody can be selected among 9 different
types. A user can adjust the intercom ring volume level and the CO ring volume level from level 0 to
level 6. Melody and volume are set by
ExtRing , IntRing setting operation in HS Setting menu of
User Menu.
The initial melody is 1, normal ring, and the initial volume setting is 3, middle volume.
Key Click and Buzzer Volume Setting Function
A user can adjust key tone volume from level 0 to level 6. The initial setting is 3, middle volume.
Also, a user can adjust buzzer volume from level 0 to level 6. The initial setting is 3, middle volume.
Key click volume and buzzer volume are adjusted by
KeyTone , Buzzer setting operation in HS
Setting menu of
User Menu
.
Cradle On and Off Function (Charger Answer On/Off Function)
When the terminal is on the charger and an intercom or CO ring is heard, just lift up the terminal,
then a call will be connected. To hang up, just put the terminal on the charger, then a call will be
disconnected. This function is set to
Enable or Disable by Chrg Ans setting operation in HS
Setting menu of
User Menu
. The initial state is Disable .
Headset Ring On and Off Function
If a headset is attached on the handset when an incoming call is received, user can also hear the
ringing tone through the headset. This function is set to
Enable or Disable by Headset setting
operation in HS Setting menu of
User Menu
. The initial state is Disable .
Auto Answer On and Off Function
When the terminal receives an intercom or CO call, if this function is enabled, then connection will
be made automatically after 9~10 seconds (This time is same as three times ringing when the
melody type is set to “TYPE 1”). This function is set to
Enable or Disable by Auto Ans setting
operation in HS Setting menu of
User Menu
. The initial state is Disable .
Battery Level Display / Low Battery Indication
This function is to see how much battery voltage level is remained.
If battery voltage level is decreased to less than 2.3V±0.1V, low
battery indication is generated. The block in a low battery icon
( ) in blinking in every second and the low battery warning
tone is generated in every 20 second until the voltage level
reaches over 2.3V±0.1V by re-charging the battery. When a user
puts the wireless terminal on the charger provided by LGE, the low battery warning tone and the
blinking low battery icon ( ) are disappeared.
S T A X X X
４６