●
aria
186/ 100/ 34E - DIGITAL KEY TELEPHONE SYSTEM USER GUIDE
24
CO Message Wait (CLI Message Wait)
Button
Procedures
Range
When a call is received with DISA/DID, the Calling Line Identification (CLI) of the incoming call is
displayed on the LCD of the station. If the DISA/DID external party hangs up the call before
answered, the CLI will be stored in the CO message wait queue in the called party.
To retrieve CLI Message,
●
Press
CALLBK
button.
●
The stored message will be shown on the LCD.
To delete the current CLI message and see the next one,
●
Press
CONF
button.
To make a callback,
●
Press
HOLD/SAVE
button.
●
The stored number is dialed as speed dialing.
To see the next/previous CLI message,
●
Press
VOLUME
button.
To delete all CLI messages,
●
Press
SPEED
button twice.
●
If DVU message is stored with CLI message, the CLI message
will not be deleted by pressing SPEED button.
DISA (Direct Inward System Access)
●
Dial the CO access code after hearing dial tone or voice guide
from DVU.
●
Or, dial the CO access code after dialing the programmed
authorization code (when needed) for outgoing call.
Button
Procedures
Outside caller can access a CO line which is programmed as DISA line.
Range
LCD Language Change
Button
Procedures
Range
●
Press
TRANS/PGM
button and dial
5 1
●
The language in LCD is changed into default value.
●
If pressing TRANS/PGM + 5 1, the language
in the LCD is changed to the nation’s language.
System Features
Button
Procedures
Alarm Reset
Range
To terminate alarm signal while idle state,
●
Dial
*
5 6 5
.
●
Confirmation tone is heard and the alarm signal is terminated
at all assigned stations.
