PRODUCT INTRODUCTION
ENGLISH
11
Wireless remote controller
Handling the remote control
- Aim at the signal receptor on the floor standing type air conditioner when operating.
- Block a strong light over the signal receptor with a curtain or etc. so as to prevent the abnormal
operation. (ex: electronic quick start, ELBA, inverter type fluorescent lamp)
- Be sure that there are no obstructions between the remote control and the signal receptor.
- Do not drop or throw the remote control.
- Do not place the remote control in a location exposed to direct sunlight, or next to a heating
unit, or other heat source.
- The feature may be changed according to the type of model.
- Some functions may not be supported, depending on the model.
Control
panel
Description
r
Remote controller operation lamp
|
Power ON/OFF button : Operation will start when this
button is pressed, and stop when the button is pressed
again.
4
FAN SPD
Indoor fan speed button : To select the desired fan speed.
Temperature setting button
A
Cooling button
B
Heating button
Auto dry button : If setting this function, evaporator will be
automatically dried before turning off the air conditioner.
X
Child lock button : In operation this function, display key will
be locked and air conditioner indicates “CL” on its display
panel.
D
Dehumidification button : Can effectively remove humidity
when at the time of rainy season or high humidity.
C
Artificial intelligence
Ampere Ctrl : To bring the effect of the power saving.
Fan mode button
IJ
Air flow direction button(Up/down, Left/right) : Adjust air
flow direction vertically or horizontally.
Power cooling/heating mode button : Powerful
cooling/heating are performed within short time
ON/OFF timer setting button : Set the time of starting or
stopping
Timer cancel button
