INSTALLATION OF UNIT
33
ENGLISH
FORCE(F)
HEIGHT(S)
REMARK
4~4,9(kgf)
20~30mm
-
S
F
Trial Run Mode
After installing the product, you must run a Test Run mode.
For details related to this operation, refer to the product manual.
Function Code
Set
Press button to start.
3
During the test run, pressing the below button will
exit the test run.
- Select operation, temperature up/down, wind flow
control, wind direction, start/stop button.
4
If pressing button long for 3 seconds, it enters
into remote controller setter setup mode.
- If pressing once shortly, it enters into user setup
mode. Please press more than 3 seconds for sure.
- Please cancel the right and left of wind direction for
RAC product.
1
Setup figure ’01’ blinks at the lower part of indication
window.
2
To Increase Belt Tension
1
Loosen adjustment nut(4places).
2
Pull motor back until belt is tight.
3
Tighten adjustment bolt after belt has cor-
rect tension.
Summary of Contents for AK-Q180BC00
Page 43: ......
