LG A2UW146FA0 Manuals Download Page 48

Page: 48 / 254

- 48 -

LGE Internal Use Only

6) Connecting the pipings to the indoor unit and the

drain hose to drain pipe.

• Align the center of the pipings and sufficiently

tighten the flare nut by hand.

• When extending the drain hose at the indoor unit,

install the drain pipe.

7) Wrap the insulation material around the connect-

ing portion.

• Overlap the connection pipe heat insulation and

the indoor unit pipe heat insulation material. Bind
them together with vinyl tape so that there is no
gap.

• Wrap the area which accommodates the rear pip-

ing housing section with vinyl tape.

• Bundle the piping and drain hose together by

wrapping them with cloth tape over the range with-
in which they fit into the rear piping housing sec-
tion.

8) Reroute the pipings and the drain hose across the

back of the chassis.

9) Set the pipings and the drain hose to the back of

the chassis with the tubing holder.

• Hook the edge of tubing holder to tap on chassis

and push the bottom of tubing holder to be
engaged at the bottom of chassis.

10) Indoor unit installation

• Remove the spacer.

• Ensure that the hooks are properly seated on the

installation plate by moving it left and right.

Press the lower left and right sides of the unit
against the installation plate until the hooks engage
into their slots(clicking sound).

Drain hose

Vinyl tape
(narrow)

Pipe

Wrap with
vinyl tape(wide)

Installation

Indoor unit tubing

Flare nut

Pipings

Vinyl tape

Adhesive

Drain hose

Indoor unit drain hose

(narrow)

Plastic bands

Insulation material

Vinyl tape
(narrow)

Connection
pipe

Connecting
cable

Indoor
unit piping

Pipe

Vinyl tape
(wide)

Wrap with vinyl tape

Piping for
passage through
piping hole

Tubing holder

Hook

Push

Drain hose

Connecting

cable

Summary of Contents for A2UW146FA0

















































































































































































































































Search results

Summary of Contents for A2UW146FA0

Reviews:

Related manuals for A2UW146FA0

Brands by name

Popular brands

LG A2UW146FA0, Manuals

Search results

Summary of Contents for A2UW146FA0

Reviews:

Related manuals for A2UW146FA0

Brands by name

Popular brands