22
Please read these simple guidelines. Failure to follow these guidelines
may be dangerous or illegal. More detailed information is given in this
manual.
WARNING
• Mobile phones must be switched off at all times in an aircraft.
• Do not hold the phone in your hand while driving.
• Do not use your phone near petrol stations, fuel depots, chemical
plants or blasting operations.
• For your safety, use ONLY specified ORIGINAL batteries and chargers.
• Do not handle the phone with wet hands while it is being charged. It
may cause an electric shock or seriously damage your phone.
• Keep the phone in a safe place out of reach of small children. It includes
small parts which if detached may present a choking hazard.
• Do not charge the phone when it is on soft furnishings.
• The phone should be charged in a well ventilated area.
CAUTION
• Switch the phone off in any area where required by special regulations.
For example, do not use your phone in hospitals or it may affect
sensitive medical equipment.
• Emergency calls may not be available on all mobile networks. Therefore,
you should never depend solely on the phone for emergency calls.
• Only use ORIGINAL accessories to avoid damage to your phone.
Guidelines for safe and efficient use
Note:
The default ATMT code is “0000”. You have to enter the code
before configuring the ATMT settings.
›
Change codes
– Change your Security code, PIN code, PIN2 code or
ATMT code.
•
Power save
(Menu > Settings > Power save) – If you set Always on, you
can save the battery power when you are not using the phone. Choose
to switch between power save settings
Always on
,
Night only
or
Off
.
•
Network selection
(Menu > Settings > Network selection) – You
can select a network that will be registered either automatically or
manually.
•
Reset settings
(Menu > Settings > Reset settings) – Use
Reset settings
to restore the factory settings. You need the security code to activate
this function. The default number is “0000”.
•
Memory status
(Menu > Settings > Memory status) – You can check
the free space and memory usage of each repository.
