LG 86TN3F Owner'S Manual Download Page 8

Page: 8 / 128

ENGLISH

ASSEMBLY AND PREPARATION

CAUTION

•

Always use genuine components to ensure safety and product performance.

•

The product warranty will not cover damage or injury caused by the use of counterfeit components.

NOTE

•

The accessories provided with your product may vary depending on the model or region.

•

Product specifications or contents in this manual may be changed without prior notice due to upgrade of product

functions.

•

SuperSign Software & Manual

- Downloading from the LG Electronics website.
- Visit the LG Electronics website (

http://partner.lge.com

) and download the latest software for your model.

•

The warranty will not cover any damage caused by using the product in an excessively dusty environment.

How to use the ferrite core

Use the ferrite core to reduce the electromagnetic interference in the power cable. Wind the power cable on the

ferrite core once.

Place the ferrite core close to the monitor.

Summary of Contents for 86TN3F

































































































































Search results

Summary of Contents for 86TN3F

Reviews:

Related manuals for 86TN3F

Brands by name

Popular brands

LG 86TN3F, Owner'S Manual

Search results

Summary of Contents for 86TN3F

Reviews:

Related manuals for 86TN3F

Brands by name

Popular brands