LG 86TN3F Owner'S Manual Download Page 86

Page: 86 / 128

ENGLISH

LG Presenter

This feature is to display the PC (Windows or Mac OS) screen on the Signage monitor with wired/wireless connection

to the PC. To use this feature, you need to install LG Presenter PC Client (“Client”) on the PC.

You can use LG Presenter in the following ways.

- Connect: Enter the PIN code to connect your Signage device to the Client.

- Screen Share: Share the PC screen of the connected Client with your Signage device.

- Hand over: If a Client is already connected and another Client needs to share screen, you can request for a hand over

to the connected Client to get permission to share screen.

- Settings: You can see the information of the Client or change the language used by the Client.

NOTE

•

This feature may not be available on some models.

•

Only sharing PC screen is supported and not voice sharing.

Summary of Contents for 86TN3F

































































































































Search results

Summary of Contents for 86TN3F

Reviews:

Related manuals for 86TN3F

Brands by name

Popular brands

LG 86TN3F, Owner'S Manual

Search results

Summary of Contents for 86TN3F

Reviews:

Related manuals for 86TN3F

Brands by name

Popular brands