24) Fixing the Reflector Lens Hole
- Tighten the reflector hole to the lens in order of No. 1
2
3 in the figure below (use Card or nail to insert the reflector sheet into the bottom of the lens).
It is recommended to push the reflector sheet into the bottom of the lens using tools such as a card, as it may be difficult to tighten when using nails
1
2
2 3
3
Using tools
Using nails
25) Assembly of 14 Support Diffuser Plates
- Insert the Support DP into the Support DP Hole on the Cover Bottom and rotate it clockwise 45 degrees (total 14ea), After assembly,
the Support DP is vertical Position to the LCM.
26) Support Pins Assembly
- Press the Support Pin with your hand down to fix it to the Cover Bottom (Total 5ea)
LED Array Assembly / Disassembly Guide
Copyright © 2019 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Summary of Contents for 70UM6970PUA
Page 113: ......
