2.7 Replacement Filter ( 10 Pack )
The unit is provided with two easy-to-use replaceable mesh
filters which can be cleaned periodically from time to time.
2.8 Wall Sleeve
This Wall Sleeve comes in industry standard size of
42" x 16"
2.9 Folding Wall Sleeve
These instruction cover the installation of a standard metal wall sleeve through masonry, steel or wood frame walls,
Fasteners are field supplied. The sleeve is shipped disassembled. It must be field assembled prior to installation.
These Wall Sleeves are fitted firmly onto the wall. The Air
Conditioner unit is slid onto it and held firmly to position by
this Wall Sleeve which acts as its support. Installation of a
wall sleeve allows flexibility to the PTAC unit.
Installation Procedure:
Installation Procedure:
The Installation and servicing of the equipment should be
performed by qualified and experienced personnel only.
1) For installing the Wall Sleeve, a wall opening 42 x 16 –
1/4 x 13 – 3/4 inch required.
For Details please refer to the Design and Installation part for
installation of the Wall Sleeve.
Replacement Filter 10-Pack
AYFT110
42" Wall Sleeve
AYSVB01A
PTAC
6RWU0-0
5
B
Mechanical accessories
79 Accessories
Step 1
Set Bottom Panel on a clean flat and level surface.
Step 2
Locate Left Side Panel. Align panel in the Left
Bottom Panel slot. Fully insert Left Panel into Bottom Panel
until locking tabs engage.
Step 3
Locate Right Side Panel. Align panel in the Right
Bottom Panel slot. Fully insert Right Panel into Bottom
Panel until locking tabs engage.
Step 4
Locate Top Panel and align with top of Right and
Left Side Panels. Fully insert Top Panel into Right and Left
Side Panels until locking tabs engage.
Step 5
(If required) Locate Weather Barrier and attach to
the rear of the assembled sleeve with four (4) supplied push
pins.
4
1
3
2
1
1
Front View
Front View
Front View
Rear View
1
