LG 55EF5E User Manual Download Page 65

Page: 65 / 79

ENGLISH

36. Check Tile Mode (Command: d z)

Checks the tile mode.

Transmission

[d][z][ ][Set ID][ ][Data][Cr]
Data FF: Checks Tile Mode
Acknowledgment

[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data 1 00: Tile Mode Off

01: Tile Mode on

Data 2 00 to 0F: tile column

Data 3 00 to 0F: tile row

* This feature may not be supported on some models.

37. Tile ID (Command: d i)

Sets the tile ID value of the product.

Transmission

[d][i][ ][Set ID][ ][Data][Cr]
Data 01 to E1: Tile ID 1 to 225

FF: Checks the Tile ID

* The data value cannot exceed the value of row x column.

Acknowledgment

[i][ ][Set ID][ ][OK/NG][Data][x]

* If you enter a value that exceeds the value of row x column

for the Data parameter, Ack becomes NG.

* This feature may not be supported on some models.

38. Natural Mode (In Tile Mode) (Command: d j)

To display the image naturally, the part of the image that

would normally be displayed in the gap between the monitors

is omitted.

Transmission

[d][j][ ][Set ID][ ][Data][Cr]
Data 00: Off

01: On

Acknowledgment

[j][ ][Set ID][ ][OK/NG][Data][x]

* This feature may not be supported on some models.

39. Energy Saving Settings (Command: f j)

Sets the Display Power Management feature.

Transmission

[f][j][ ][Set ID][ ][Data][Cr]
Data 00: Off

04: 1 minute

05: 3 minutes

06: 5 minutes

07: 10 minutes

Acknowledgment

[j][ ][Set ID][ ][OK/NG][Data][x]

* This feature may not be supported on some models.

40. Remote Control/Local Key Lock (Command: k m)

Adjusts the remote control/local key (front) lock.

Transmission

[k][m][ ][Set ID][ ][Data][Cr]
Data 00: Off (Lock Off)

01: On (Lock On)

* When the monitor is turned off, the power key works even in

On (01) mode.

Acknowledgment

[m][ ][Set ID][ ][OK/NG][Data][x]

* This feature may not be supported on some models.

41. Power On Delay (Command: f h)

Sets the schedule delay for when the power turns on (unit:

seconds).

Transmission

[f][h][ ][Set ID][ ][Data][Cr]
Data 00 to FA: min. 0 to max. 250 (seconds)
Acknowledgment

[h][ ][Set ID][ ][OK/NG][Data][x]

* The maximum value may differ depending on the model.

Summary of Contents for 55EF5E
















































































Search results

Summary of Contents for 55EF5E

Reviews:

Related manuals for 55EF5E

Brands by name

Popular brands

LG 55EF5E, User Manual

Search results

Summary of Contents for 55EF5E

Reviews:

Related manuals for 55EF5E

Brands by name

Popular brands