- 12 -
LGE Internal Use Only
Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
15. Set information(Serial No & Model name)
(1) Setting up like bottom figure (After setting white balance,
this is set)
1) Press ADJ Key in the Adjust remocon.
2) Select “System Control 2” by using
D
/
E
(CH+/-) key,
and press
A
(ENTER).
3) Using Adjust remocon, RS-232 Host & Baud Rate &
Download value change (RS-232 Host:Gprobe, Baud
Rate:115200bps, Download:Cortez)
(2) Bar-code scanning
1) Push the menu button in DTV mode.
Select the STATION -> Diagnostics -> To set
2) Check the Serial Number.
16. Select method of Tool option
(1) Press ADJ Key in the Adjust remote control.
(2) Select “Tool option 1” and “Tool option2” by using
D
/
E
(CH+/-) key, and press
A
(ENTER).
(3) TOOL OPTION1
1) Select “Maker” by using
D
/
E
(CH+/-) key, and change
the module maker and. applied module classification by
using
F
/
G
(VOL+/-).
2) Select “Inch” by using
D
/
E
(CH+/-) key, and change the
module according to the inch of model.
(4) TOOL OPTION2
1) Select “TOOL NUM” by using
D
/
E
(CH+/-) key, and
change the module maker and. applied module
classification by using
F
/
G
(VOL+/-).
2) Select “FAN” by using
D
/
E
(CH+/-) key, change the
module according to the inch of model.
3) Select “DIGITAL” by using
D
/
E
(CH+/-) key, and change
the tool name according to the model.
( Inch of model : “42,50” Applied module under the calassificatoin : )
6) After changing the Tool option1,2, push the EXIT Key.
Tool option1
Maker
Inch
Tool
2048
LGX4
42
PT85
2052
LGX4
50
PT85
Tool option2
Suffix
FAN
DIGITAL AMP
1665
KE*L(Y)LMP
0
1
1921
KE*L(Y)LMP
1
1
1665
KE*FLMP
0
1
