12
Insignia NS-PDP50 50" Plasma TV-720P
www.insignia-products.com
Connecting a PC
You can connect a PC using the computer’s
VGA jack or DVI jack.
Connecting to the VGA port
To connect a PC:
1
Connect a VGA cable to the
RGB IN (PC)
jack on the back of your plasma TV, then
connect the other end to the VGA (also called
RGB) out jack on the computer.
2
Connect an audio cable to the
AUDIO IN
(RGB/DVI)
jack on the back of your TV, then
connect the other end to the audio out jack
on the computer.
3
Turn on your plasma TV and the computer.
4
Press
INPUT
one or more times to select
RGB-PC
.
Connecting to the DVI port
To connect a PC:
1
Connect an HDMI-to-DVI cable to the
HDMI
IN 1 (DVI)
jack on the back of your plasma
TV, then connect the other end of the cable
to the DVI out jack on the computer.
2
Connect an audio cable to the
AUDIO IN
(RGB/DVI)
jack on the back of your plasma
TV to the audio out jack on the computer.
3
Turn on your plasma TV and the computer.
4
Press
INPUT
one or more times to select
HDMI1/DVI
.
Adjusting the PC display image
After you connect the PC to your plasma TV, you
may need to adjust the PC display image’s
resolution, position, size, or phase.
To adjust the PC display image:
1
Press
PC ADJ
.
2
Press or to select the option you want to
adjust, then press
ENTER
. You can select:
•
Resolution
–Adjusts the size of the items
(such as icons and dialog boxes) that are
displayed.
•
Position
–Moves the display image up,
down, right, or left.
•
Size
–(RGB only) Minimizes vertical bars
or stripes on the display image’s
background. The range is -30 to +30.
When you change this option, the
horizontal screen size also changes.
•
Phase
–(RGB only) Removes any
horizontal noise and clears or sharpens
the display image. The range is -16 to
+16.
3
Press , , , or to adjust the option.
4
Press
ENTER
.
To reset PC display image settings:
1
Press
PC ADJ
, then press or to select
Reset
.
2
Press
ENTER
, then press or to select
Yes
.
3
Press
ENTER
.
Using your plasma TV
Turning your plasma TV on or off
To turn your plasma TV on or off:
1
Make sure that the power cord is connected
and plugged into a power outlet. Your plasma
TV enters standby mode.
2
Press one of the following buttons:
On the front of your plasma TV:
•
Power
•
INPUT
•
CH+
•
CH–
On the remote control:
•
POWER
•
TUNER
•
INPUT
•
TV INPUT
•
CH+
•
CH–
3
To turn off your plasma TV, press
POWER
on the remote control. Your plasma TV
enters standby mode.
Caution
If you do not intend to use your plasma TV for an
extended time, unplug the power cord from the
power outlet. This will protect your plasma TV
from power surges or lightning.
07-287_NS-PDP50_English Only.fm Page 12 Wednesday, July 11, 2007 12:05 PM