background image

 

Web Site: http://panasonic.net

© Panasonic Corporation 2012

 M0312-0

 Printed in Thailand

 Customer’s Record

 The model number and serial number of this product may be found on its rear panel. You should note this serial 
number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of 
your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.

 Model Number

 Serial Number

 Information on Disposal in other Countries outside the European Union

 

 This symbol is only valid in the European Union. If you wish to discard this product, please contact 
your local authorities or dealer and ask for the correct method of disposal.

  Maintenance

 First, remove the mains plug from the socket outlet.

 Display panel, Cabinet, Pedestal

 Regular care:

 Gently wipe the surface of the display panel, 
cabinet, or pedestal by using a soft cloth to clean the 
dirt or fingerprints.

 For stubborn dirt:

 First clean the dust on the surface. Dampen a soft cloth with 
clean water or diluted neutral detergent (1 part detergent to 100 
parts water). Wring the cloth and wipe the surface. Finally, wipe 
away all the moisture.

 Caution

 

 Do not use a hard cloth or rub the surface too hard, otherwise this may cause scratches on the surface.

 

 Take care not to subject the TV’s surfaces to water or detergent. Liquid inside the TV could lead to product failure.

 

 Take care not to subject the surfaces to insect repellent, solvent, thinner or other volatile substances. This may 
degrade surface quality or cause peeling of the paint.

 

 The surface of the display panel is specially treated and may be easily damaged. Take care not to tap or scratch the 
surface with your fingernail or other hard objects.

 

 Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time. This may 
degrade surface quality.

 Mains plug

 Wipe the mains plug with a dry cloth at regular intervals. Moisture and dust may lead to fire or electrical shock.

Summary of Contents for Viera VT50A series





















































































































Reviews: