9
Insignia NS-PDP50 50" Plasma TV-720P
www.insignia-products.com
Connecting an antenna or cable TV
Analog and digital TV signals on a single cable
To connect an antenna or cable TV:
1
Connect one end of a 75 ohm cable to the
ANTENNA/CABLE IN
jack on the back of
your TV.
2
Connect the other end of the cable to the
antenna or cable TV jack.
Analog and digital TV signals on separate cables
To connect an antenna or cable TV:
Using a signal amplifier or two-way splitter
You may need to install a signal amplifier or a
two-way splitter if:
•
Reception is poor (use a signal amplifier).
•
Signal from the antenna needs to be split
between two TVs (use a two-way splitter).
Connecting a standard A/V device
To connect a standard A/V device:
1
Connect the video (yellow), right audio (red),
and left audio (white) plugs on a standard
A/V cable to the
AV1
(back)
or
AV2
(side)
jacks on your plasma TV.
2
Connect the plugs on the other end of the
cable to the corresponding jacks on the
external device.
3
Turn on your plasma TV and the device.
4
Press
INPUT
one or more times to select
AV1
or
AV2
.
Connecting an S-Video device
To connect an S-Video device:
1
Connect an S-Video cable to the
S-VIDEO
jack on the back or side of your plasma TV,
then connect the other end of the cable to the
S-Video out jack on the external device.
ANTENNA/
CABLE IN
Cable TV
Antenna
OR
ANTENNA/
CABLE IN
OR
ANTENNA/
CABLE IN
Signal amplifier or
two-way splitter
R
L
AUDIO
VIDEO
Side jacks shown
07-287_NS-PDP50_English Only.fm Page 9 Wednesday, July 11, 2007 12:05 PM