background image

ENGLISH

15

Troubleshooting

Cannot control the TV with the remote control.

•  Check the remote control sensor on the product and try again.
•  Check if there is any obstacle between the product and the remote 

control.

•  Check if the batteries are still working and properly installed (   

to  ,   to  ).

No image display and no sound is produced.

•  Check if the product is turned on.
•  Check if the power cord is connected to a wall outlet.
•  Check if there is a problem in the wall outlet by connecting other 

products.

The TV turns off suddenly.

•  Check the power control settings. The power supply may be 

interrupted.

•  Check if the 

Sleep Timer

 / 

Timer Power Off 

 is activated in the 

Timers 

settings.

•  Check if the 

Auto Power Off

 is activated in the 

GENERAL

 

 Eco 

mode

 settings. (Depending on model)

•  If there is no signal while the TV is on, the TV will turn off 

automatically after 15 minutes of inactivity.

When connecting to the PC (HDMI ), ‘No signal’ or ‘Invalid Format’ is 
displayed.

•  Turn the TV off/on using the remote control.
•  Reconnect the HDMI cable.
•  Restart the PC with the TV on.

Registering magic remote

How to register the magic remote

To use the Magic Remote, first pair it with your TV. 

1   Put batteries into the Magic Remote and turn the TV on.
2  Point the Magic Remote at your TV and press the   

Wheel (OK)

 on 

the remote control.

*   If the TV fails to register the Magic Remote, try again after turning 

the TV off and back on.

How to deregister the magic remote

Press the 

 and   

(HOME)

 buttons at the same time, for five 

seconds, to unpair the Magic Remote with your TV.
*   Pressing and holding the 

 button will let you cancel and re-

register Magic Remote at once.

Licenses

Supported licenses may differ by model. For more information about 
licenses, visit 

www.lg.com

.

 

Open source software 

notice information

To obtain the source code under GPL, LGPL, MPL, and other open source 
licenses, that is contained in this product, please visit 

http://opensource.

lge.com

.

In addition to the source code, all referred license terms, warranty 
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM 
for a charge covering the cost of performing such distribution (such 
as the cost of media, shipping, and handling) upon email request to 
[email protected]. This offer is valid for three (3) years from the date 
on which you purchased the product.

External control device 

setup

To obtain the external control device setup information, please visit 

www.lg.com

.

Summary of Contents for 43lh595t





















Reviews: