LG 42PG69 Series, Owner'S Manual

Page: 111 / 116

109
APPENDIX
01. Power k a 00 ~ 01
02. Aspect Ratio k c Refer to p. 110
03. Screen Mute k d 00 ~ 01
04. Volume Mute k e 00 ~ 01
05. Volume Control k f 00 ~ 64
06. Contrast k g 00 ~ 64
07. Brightness k h 00 ~ 64
08. Colour k i 00 ~ 64
09. Tint k j 00 ~ 64
10. Sharpness k k 00 ~ 64
11. OSD Select k l 00 ~ 01
12. Remote control lock mode k m 00 ~ 01
13. Balance k t 00 ~ 64
14. Colour Temperature k u 00 ~ 03
15. Red Adjustment k v 00
~
50
16. Green Adjustment k w 00 ~ 50
17. Blue Adjustment k $ 00 ~ 50
18. Abnormal Status k z 00 ~ 07
19. ISM Method j p Refer to p. 112
20. Low Power j q 00 ~ 01
21. Orbiter Time Setting j r 01 ~ FE
22. Orbiter Pixel Setting j s 00 ~ 03
23. Auto Configure j u 01
24. Channel Select Command m a Refer to p. 113
25. Send IR Code m c Key Code
26. Input select (Main) x b Refer to p. 113
Communication Parameters
A
Baud rate : 9600 bps (UART)
A
Data length : 8 bits
A
Parity : None
A
Stop bit : 1 bit
A
Communication code : ASCII code
A
Use a crossed (null modem) cable.
Transmission
* [Command 1] : First command to control the
TV
.
(j, k, m or x)
* [Command 2] : Second command to control the
TV
.
* [Set ID]
: You can adjust the
TV
ID to choose
desired monitor ID number in option
menu.
Adjustment range is 1
~ 99.
When selecting Set ID ‘0’, every connected
TV is controlled.
Set ID is indicated as decimal (1
~ 99) on
menu and as Hexa decimal (0x0 ~ 0x63)
on transmission/receiving protocol.
* [DATA]
: To transmit command data.
Transmit ‘FF’ data to read status of
command.
* [Cr]
: Carriage Return
ASCII code ‘0x0D’
* [ ]
: ASCII code ‘space (0x20)’
[Command1][Command2][ ][Set ID][ ][Data][Cr]
OK Acknowledgement
* The TV transmits ACK (acknowledgement) based on
this format when receiving normal data. At this time, if
the data is data read mode, it indicates present status
data. If the data is data write mode, it returns the
data of the PC computer.
[Command2][ ][Set ID][ ][OK][Data][x]
Error Acknowledgement
* The TV transmits ACK (acknowledgement) based on
this format when receiving abnormal data from
non-viable functions or communication errors.
[Command2][ ][Set ID][ ][NG][Data][x]
Transmission / Receiving Protocol Command Reference List
* When setting the 18
~ 26, a menu does not appear on
screen.
Data 01: Illegal Code
02: not support function
03: Wait more time
COMMAND
1
COMMAND
2
DATA
(Hexadecimal)