background image

ENGLISH

3

WARNING

 - This is a class A product. In a domestic environment this product may cause radio interference in which 

case the user may be required to take adequate measures.

SAFETY PRECAUTIONS

Please read these safety precautions carefully before using the product.

 WARNING

If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.

 CAUTION

If you ignore the caution message, you may be slightly injured or the product may be damaged.

 WARNING

 •

Indoor Use Only.

Precautions In Installing the Product

 WARNING

 •

Keep away from heat sources like electrical heaters.

 - Electrical shock, fire, malfunction, or deformation may occur.

 •

Keep the packing anti-moisture material or vinyl packing out of the reach of children.

 - Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the 

nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

 •

Do not put heavy objects on the product or sit upon it.

 - If the product collapses or is dropped, you may be injured. Children must pay particular attention.

 •

Do not leave the power or signal cable unattended on the pathway.

 - The passerby can trip or fall, which can cause electrical shock, fire, product breakdown, or injury.

 •

Install the product in a neat and dry place.

 - Dust or moisture can cause electrical shock, fire or product damage.

 •

If you can smell smoke or other odors or hear a strange sound unplug the power cord and contact the service center.

 - If you continue to use without taking proper measures, electrical shock or fire can occur.

 •

If you dropped the product or the case is broken, turn off the product and unplug the power cord.

 - If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service center.

Summary of Contents for 42LS73C








































































































































Reviews: