- 16 -
LGE Internal Use Only
Copyright LG Electronics. Inc. All right reserved.
Only for training and service purposes
5.3 Adjustment Color Temperature (White
balance)
A
Using Instruments
• Color Analyzer: CA-210 (CH 9)
- Using LCD color temperature, Color Analyzer (CA-210)
must use CH 9, which Matrix compensated (White, Red,
Green, Blue compensation) with CS-2100. See the
Coordination bellowed one.
• Auto-adjustment Equipment (It needs when Auto-
adjustment – It is availed communicate with RS-232C :
Baud rate: 115200)
• Video Signal Generator MSPG-925F 720p, 216Gray
(Model: 217, Pattern 78)
A
Connection Diagram (Auto Adjustment)
• Using Inner Pattern
• Using HDMI input
<Pic.5 Connection Diagram for Adjustment White balance>
A
White Balance Adjustment
If you can’t adjust with inner pattern, then you can adjust it
using HDMI pattern. You can select option at “Ez-Adjust
Menu – 7. White Balance” there items “NONE, INNER,
HDMI”. It is normally setting at inner basically. If you can’t
adjust using inner pattern you can select HDMI item, and
you can adjust.
In manual Adjust case, if you press ADJ button of service
remocon, and enter “Ez-Adjust Menu – 7. White Balance”,
then automatically inner pattern operates. (In case of
“Inner” originally “Test-Pattern. On” will be selected in The
“Test-Pattern. On/Off”.
• Connect all cables and equipments like Pic.5)
• Set Baud Rate of RS-232C to 115200. It may set 115200
orignally.
• Connect RS-232C cable to set
• Connect HDMI cable to set
A
RS-232C Command (Commonly apply)
• “wb 00 00”: Start Auto-adjustment of white balance.
• “wb 00 10”: Start Gain Adjustment (Inner pattern)
• “jb 00 c0” :
• …
• “wb 00 1f”: End of Adjustment
* If it needs, offset adjustment (wb 00 20-start, wb 00 2f-
end)
• “wb 00 ff”: End of white balance adjustment (inner pattern
disappear)
C A -100+
C O L O R
A N A L Y Z E R
T Y P E ; C A -100+
F u l l W h i t e P at t er n
R S-232C
Summary of Contents for 32LW5700
Page 54: ......
