- 14 -
LGE Internal Use Only
Copyright ©
LG Electronics. Inc. All rights reserved.
Only for training and service purposes
5.2. Tool Option setting & Inspection per
countries
5.2.1. Overview
(1) Tool option selection is only done for models in Non-USA
North America due to rating
(2) Applied model: LA46B Chassis applied to CANADA and
MEXICO
5.2.2. Country Group selection
(1) Press ADJ key on the Adj. R/C, and then select Country
Group Menu
(2) Depending on destination, select US, then on the lower
Country option, select US, CA, MX.
Selection is done using +, - KEY
5.2.3. Tool Option inspection
▪ Press Adj. key on the Adj. R/C, then select Tool option
Model
Tool 1 Tool 2 Tool 3 Tool 4 Tool 5 Tool 6 Tool 7
32LB580B-UG(Sharp)
6769
13329 33152 64070 4566
1353 41771
32LB580B-UG(LGD)
625
13329 33152 64070 4310
1354 41771
32LB5800-UG
625
13329 33152 64070 4310
1353 41771
39LB5800-UG
14963 13329 33152 64070 4566
1353 41771
42LB5800-UG(LGD)
628
13329 33152 64070 4310
1433 41771
42LB5800-UG(AUO)
4724
13329 33152 64070 4310
1353 41771
47LB5800-UG
629
13329 33152 64070 4310
1353 41771
50LB5800-UG(AUO)
4726
13329 33152 64070 4310
1353 41771
50LB5800-UG(INX)
14966 13329 33152 64070 4310
1353 41771
55LB5800-UG(LGD)
631
13329 33152 64070 4310
1402 41771
55LB5800-UA(AUO)
4727
13329 33152 64070 4310
1353 41771
47LB6100-UG
677
13329 33152 64070 12502 1353 41771
50LB6100-UG(LGD)
678
13329 33152 64070 12502 1353 41771
50LB6100-UG(AUO)
4774
13329 33152 64070 12502 1353 41771
50LB6100-UG(INX)
15014 13329 33152 64070 12502 1353 41771
55LB6100-UG(LGD)
679
13329 33152 64070 12502 1402 41771
55LB6100-UG(AUO)
4775
13329 33152 64070 12502 1353 41771
60LB6100-UG
39592 13329 33152 64070 12502 1353 41771
65LB6190-UD
34467 13329 33152 64070 12502 1353 41771
※
Tool option can be reconstructed by Software
5.3. Magic Motion remote controller Check
5.3.1. Test equipment
▪ RF-remote controller for check, IR-KEY-CODE remote
controller.
▪ Check AA battery before test. A recommendation is that a
tester change battery every lots.
5.3.2. Test
(1) Make pairing with TV set by pressing “Start key(Wheel
key)” on RCU.
(2) Check a cursor on screen by pressing ‘Wheel key” of RCU
(3) Stop paring with TV set by pressing “Back+ Home” key of
RCU
5.3.3. Applied models
Chassis
Model Name
Magic RF receiver
LA46B
32LB580B-UG
Dongle
32/39/42/47/50/55LB5800-
UG
47/50/55/60LB6100-UG
※
Dongle Model : An USB dongle-type receiver will be
supplied in form of accessory. So this
pairing test is not necessary for these
models
5.4. Wi-Fi MAC Address Check
5.4.1. Using RS232 Command
Command
Set ACK
Transmission
[A][l][][Set ID][][20][Cr] [O][K][x] or [N][G]
5.4.2. Check the menu on in-start
Summary of Contents for 32LB5800
Page 41: ......