- 8 -
LGE Internal Use Only
Copyright ©
LG Electronics. Inc. All rights reserved.
Only for training and service purposes
ADJUSTMENT INSTRUCTION
1. Application Range
This specification sheet is applied to all of the LED TV with
MSD3393LU chassis.
2. Designation
(1) The adjustment is according to the order which is
designated and which must be followed, according to the
plan which can be changed only on agreeing.
(2) Power adjustment : Free Voltage.
(3) Magnetic Field Condition: Nil.
(4) Input signal Unit: Product Specification Standard.
(5) Reserve after operation: Above 5 Minutes (Heat Run)
Temperature : at 25 °C ± 5 °C
Relative humidity : 65 ± 10 %
Input voltage : 1
20
V~, 50/60 Hz
(6) Adjustment equipments
: Color Analyzer(CA-210 or CA-310), Service remote control.
(7) Push the “RESTORE" key - For memory initialization.
3. Main PCB check process
▪
APC - After Manual-Insert, executing APC
Case1 : Software version up
1.
,
B
S
U
y
b
W
/
S
g
n
i
d
a
o
l
n
w
o
d
r
e
tf
A
TV set will reboot
automatically.
2. Push “RESTORE” key.
3. Push “Power on” key.
4. Function inspection
5. After function inspection, Push “RESTORE” key.
Case2 : Function check at the assembly line
1. When TV set is entering on the assembly line, Push
“RESTORE” key at first.
2. Push “Power on” key for turning it on.
→
If you push “Power on” key, TV set will recover
channel information by itself.
3. After function inspection, Push “RESTORE” key.
:
*. Burning HDCP EY
1.
Connect your PC to TV set with USB debug cable.
2.
Turn on the TV set, then open the HDCP operating tool
“MStar IS P Utility V4.5.7 Alpha”.
3. Click “Connect”to get communication from the TV set,
and read out the device type.
4. Click “HDCP”to enter HDCP management
interface. Change the Value“HDCP Key Index”
to “1”, “HDCP Key Allocation”to
"0X390000"for
32LB520B/60LB5200/65LB5200.
5. Click “HDCP Key File”to load the HDCP Key file
provided.
