16
206-4213
Custom Master TV Setup (Cont.)
CHANNEL
OK
Move
• Auto Tuning
•
Manual Tuning
•
Channel Edit
•
Channel Label
(Optional) Use Channel Menu options
to run Auto Tuning, edit channels, and
select channel icons.
(Continued on next page)
4. (Optional) Run Auto Tuning.
Note: If you intend to use a USB memory device / .tlx file
for cloning purposes, DO NOT run Auto Tuning. If you
Teach a .tlx file with an auto-tuned/edited Channel Map to
a Target TV, this will put the Target TV in FTG Mode via
CPU. Proceed to step 7 to verify the TV setup. (Steps 5
and 6 are not applicable for .tlx files.)
If you run Auto Tuning with the intention to clone the resulting
Channel Map, you must use a USB memory device / .tll file or a
clone programmer for this cloning purpose.
a) To search for all available analog and digital channels, go to the
Channel Menu, select the
Auto Tuning
option, and follow the
on-screen instructions.
b) Use the
Channel Edit
option in the Channel Menu to edit the
channel lineup, as necessary, to include only free to guest (non-
encrypted) channels.
• Add/delete channels per your system requirements.
• Use the
Channel Label
option in the Channel Menu to select
the appropriate trademark/icon for each channel’s Channel-Time
on-screen display. Icons are available for familiar channels,
such as ABC, CBS, NBC, etc. Identifiable labels (icons) should
enable the end user to readily know what common networks are
available.
Note:
If you intend to clone the PTC and Installer Menu item 103
ATSC TUNE MODE is set for Physical Channel tuning (default
and recommended setting), channels with minor channel numbers
higher than 255 will not transfer correctly in step 5. If item 103 is
set for Virtual Channel tuning and either the major or minor channel
numbers are higher than 255, the channel(s) will not transfer
correctly in step 5.
Note:
If you intend to clone the PTC, you can add the channel
icons in this step or as described in step 6. Also in step 6, you can
add custom text labels for channels without icons.
(Continued from previous page)
Note:
If you intend to clone the PTC, remember that only one TV source’s clonable setup
menu settings will be cloned. Thus, for a clone programmer, the TV setup menu settings
should be applicable to either an analog channel or Aux input, while for a USB device / .tll file,
the TV setup menu settings should be applicable to the analog or digital channel or Aux input
to which the Target TV will be set during the Teaching process.
Note:
If desired and if appropriate depending on the cloning method to be used (see “Cloning
Methods” on page 14), you can run Auto Tuning (see step 4) prior to completing this step.
