29
ENGLISH
[Settings]
[Picture]
[Picture Reset]
•
[Do you want to reset your picture settings?]
-
[Yes]: Returns to the default settings.
-
[No]: Cancel the select.
[General]
[Settings]
[General]
•
[Language]: Sets the menu screen to the desired language.
•
[SMART ENERGY SAVING]: Conserve energy by using luminance compensation algorithm.
-
[High]: Saves energy using the high-efficiency [SMART ENERGY SAVING] feature.
-
[Low]: Saves energy using the low-efficiency [SMART ENERGY SAVING] feature.
-
[Off]: Disables the feature.
NOTE
•
The value of energy saving data may differ depending on panel and panel suppliers.
•
If you select the option of [SMART ENERGY SAVING] is [High] or [Low], monitor luminance become higher or
lower depend on source.
•
[Deep Sleep Mode]: When [Deep Sleep Mode] is [On], power consumption is minimized while the monitor is
in standby mode (only for 27QP88D/27BP88QD).
-
[On]: Enables [Deep Sleep Mode].
-
[Off]: Disables [Deep Sleep Mode].
* If Deep Sleep Mode is Off, monitor only turns off the back light while the monitor is standby mode.
•
[Power LED]: When the Power LED function is turned on, it operates as follows:
-
On mode: White
-
Sleep mode(Standby Mode) : White Blinking
-
Off mode: Off
•
[Automatic Standby]: Feature that automatically turns off the monitor when there is no movement on the
screen for a period of time. You can set a timer for the auto-off function. ([Off], [4H], [6H], and [8H])
•
[DisplayPort Version]: Set DisplayPort Version to the same version as the connected external device. ([1.4]
and [1.2]) To use the HDR function, set to [1.4].
•
[DP OUT]: Set DP OUT for Multi Stream Transport (only for 27QP88D/27BP88QD).
-
[On]: Returns to the default settings.
-
[Off]: Cancel the select.
NOTE
•
Make sure that the graphics card supports the MST function.
•
Because of the bandwidth limit of Display Port Ver.1.2, up to 2560 x 1440 @ 75 Hz monitor can be connected
and used.
•
If the DP OUT is enabled, HDR is not supported.
